User guide

Hardware options installation 46
4.
Install the redundant power supply into the bay until it clicks.
5. Connect the power cord to the power supply.
6. Use the strain relief clip from the server hardware kit to secure the power cord.
7. Route the power cord through the cable management solution.
8. Connect the power cord to the power source.
9. Be sure that the power supply LED is green ("Rear panel LEDs and buttons" on page 10).
10. Be sure that the front panel external health LED is green ("Front panel LEDs and buttons" on page 8).
Expansion board options
Installing an expansion board
The server ships with PCI Express slots. PCI or PCI-X expansion boards are supported with optional riser
boards.