User guide
Hardware options installation 43
3.
Install the hot-plug hard drive.
4. Determine the status of the hot-plug hard drive by observing the drive LEDs ("SAS and SATA hard
drive LED combinations" on page 16).
5. Resume normal server operations.
Multibay device options
Several multibay devices can be installed in the server. For a list of supported multibay devices, refer to
the QuickSpecs on the HP website (http://www.hp.com/support
).
To install the component:
1. Power down the server (on page 18).
NOTE: Access to the ejector button is intentionally restricted. To eject the optical device, push the ejector
button with a small flat object such as a key or pen.
2. Push the multibay drive ejector button to eject the device or blank.