Specifications

Removal and replacement procedures 36
8. Remove the server blade handle.
To replace the component, reverse the removal procedure.
Release button
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove all hard drives ("Hard drive" on page 26).
5. Remove all hard drive blanks ("Hard drive blank" on page 26).
6. Remove the hard drive backplane ("Hard drive backplane" on page 29).
7. Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on
page 31).