Specifications

Removal and replacement procedures 30
To replace the component:
1. Install the hard drive backplane. Press down on the hard drive backplane retainer to seat the board.
2. Install the hard drives ("Hard drive" on page 26).
3. Install the hard drive blanks ("Hard drive blank" on page 26).
4. Install the access panel ("Access panel" on page 25).
5. Install the server blade.
Hard drive backplane retainer
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove all hard drives ("Hard drive" on page 26).
5. Remove all hard drive blanks ("Hard drive blank" on page 26).
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive
backplane.
6. Remove the hard drive backplane ("Hard drive backplane" on page 29).