Instruction Manual

Operational overview 6
• Access a remote graphic console (Virtual KVM)
• Access the serial console of the host operating system over the network using standards-based client
utilities
• Switch between serial console redirection or the LO100 command line interface
• Communicate securely using SSL and SSH
• Remotely control the power button of the server (power on and off the server), or perform warm or
cold server reboots
• Remotely monitor fan speed and system power state (S0 or S5)
• Access the system event log
• Access virtual media
• Configure TCP/IP settings for the LO100 NIC
• Control user access
• Discover, identify, and launch LO100 from HP Systems Insight Manager
• Access LO100 and server controls using a standard browser or new industry-standard SMASH CLP
command line interface
• Access command line help
• Manage the server with IPMI 2.0 and DCMI 1.0 compliant applications
• Access Telnet
Not all of the features displayed and described in the guide are available on all systems. To verify which
features are supported on your system, see "LO100 standard features" and "LO100 optional (licensed)
features" for more information.
LO100 standard features
For HP ProLiant ML110 G6, ML150 G6, DL120 G6, DL160 G6, DL160se G6, DL170h G6, DL180 G6,
SL160z G6, SL170z G6, and SL2x170z G6 servers; and HP ProLiant DL165 and SL165z G7 servers,
LO100 standard features include the following:
• IPMI 2.0 and DCMI 1.0 elements available through the operating system (where supported)
• IPMI-over-LAN support
• Web browser access (HTTP) to power control, system event log, hardware status, and license key
activation of optional features
• SMASH CLP interface access to remote power control, system event log, hardware status, and
operating system serial console
• Support for SSL, SSH, and IPMI 2.0 security with factory-default self-signed certificates and keys