Instruction Manual

Using LO100 26
Specific commands
CLP syntax for specific commands is found in the sections that also describe the functionality through the
Web interface.
DCMI 1.0 support
LO100 supports Data Center Manageability Interface (DCMI). DCMI enables you to simplify platform
management implementations while enhancing robustness. Specifications are derived from Intelligent
Platform Management Interface (IPMI) 2.0, which has been widely adopted by the computing industry for
server management and system-health monitoring. For more information, see the Intel website
(
http://developer.intel.com/technology/product/DCMI/index.htm).
IPMI 2.0 support
LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized, abstracted
interfaces that can be used for monitoring and control functions that are built in to the platform hardware.
In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI 2.0
features are supported by LO100:
• Additional IPMI 2.0 commands
o Get Channel Cipher Suites
o Set/Get Channel Security Keys
o Suspend/Resume Payload Encryption
• Payload types
o IPMI Message
o RMCP+ Open Session Request/Response
o RAKP Message 1 / 2
o RAKP Message 3 / 4
• Authentication algorithms
o RAKP-none
o RAKP-HMAC-SHA1
• Integrity algorithms
o None
o HMAC-SHA1-96
• Confidentiality algorithms
o None
o AES-CBC-128