Specifications

Server component identification 69
Position Description Function
S1 iLO security Off = iLO security is enabled
On = iLO security is disabled
S2
Configuration
lock
Off = System configuration can
be changed
On = System configuration is
locked
S3 Reserved Reserved
S4 Reserved Reserved
S5
Password
protection
override
Off = No function
On = Clears power-on
password and administrator
password
S6
Invalidate
configuration
Off = Normal
On = ROM treats system
configuration as invalid
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly
configure the server or data loss could occur.
Power supply backplane LED
If the power supply backplane LED is illuminated, then the power supply backplane must be replaced.