Specifications

Server component identification 68
System board components
Item Description Item Description
1 Redundant fan 2 connector 13 Power supply connector
2 System maintenance switch 14 SCSI port 1
3 System battery 15 PPM socket 2
4 Redundant fan 4 connector 16 PPM socket 1 (populated)
5
64-bit/100-MHz PCI-X slot,
bus 3
17 SCSI port 2
6
64-bit/100-MHz PCI-X slot,
bus 3
18 Fan cable connector
7
64-bit/100-MHz PCI-X slot,
bus 7
19 Diskette drive connector
8
64-bit/100-MHz PCI-X slot,
bus 7
20 IDE connector
9
PCI Express x4 slot, bus
11 *
21 DIMM slots
10
PCI Express x4 slot, bus
14 *
22 Processor 1
11
RILOE II connector (install
adapter into slot 1) **
23 Processor 2
12
Power supply signal
connector
* x8 PCI Express cards are supported, but will run at x4 speeds.
** The server comes with iLO remote management capability embedded on the system board. The 30-pin remote
management connector for the RILOE II board is provided if the server environment requires an upgrade for improved
Remote Console performance.
System maintenance switch
The system maintenance switch (SW1) is a six-position switch that is used for system configuration. The
default position for all six positions is Off.