Manualshelf

Specifications

ManualsBrandsHP ManualsComputer equipmentProLiant ML370 Generation 6
41424344454647484950
Removal and replacement procedures 45
7.
Remove the SCSI backplane.
To replace the component, reverse the removal procedure.
Duplex SCSI board
1. Power down the server (on page 16).
2. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).
3. Remove the rack bezel (rack servers only) ("Rack bezel" on page 20).
4. Extend or remove the server from the rack ("Extending the server from the rack" on page 16).
5. Remove the access panel ("Access panel" on page 20).
6. Remove the hard drive cage ("Hard drive cage (SCSI)" on page 25).
7. Remove the duplex SCSI board from the SCSI backplane.
If replacing the SCSI backplane and drive cage, refer to SCSI backplane.
To replace the component, reverse the removal procedure.