Specifications

Removal and replacement procedures 40
CAUTION: Do not mix the 2-MB L2 Cache processors with the 1-MB L2 Cache processors.
To remove the component:
1. Power down the server (on page 16).
2. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).
3. Extend or remove the server from the rack ("Extending the server from the rack" on page 16).
4. Remove the access panel ("Access panel" on page 20).
5. Remove the processor air baffle ("Processor air baffle" on page 34).
6. Open the processor cage.
7. Lift the processor retaining bracket lever to release the processor retaining bracket.
8. Lift the processor retaining bracket.
9. Release the processor locking lever.
10. Remove the processor/heatsink assembly.
To replace the component:
1. Open the processor retaining bracket.
2. Install the processor/heatsink assembly into the available processor socket: