Specifications

Removal and replacement procedures 39
8.
Disconnect the diskette drive cable and power cable from the diskette drive.
9. Loosen the thumbscrews that secure the retaining bracket to the diskette chassis.
10. Pull the diskette retaining bracket forward to disengage the tabs and lift the bracket from the chassis.
11. Pull the diskette drive backward about 1 cm (0.4 in) and lift it up to clear the base.
12. Remove the diskette drive from the chassis.
To replace the component, reverse the removal procedure.
Processor assembly
CAUTION: Be sure that you have the current version of the system ROM. Failure to flash the ROM with the
correct version before installing or replacing the processor causes system failure. For the most current version
of the ROM, go to the HP website (http://www.hp.com/support
).
CAUTION: The processor, heatsink, and retaining clip comprise a single assembly. Separating the
processor from the heatsink causes thermal instability and damage to the server.