Specifications

Removal and replacement procedures 36

Disconnect the fan cable from the system board.

9. Lift the center wall away from the chassis.

To replace the component, reverse the removal procedure.

CD-ROM drive

To remove the component:

1. Power down the server (on page 16).

2. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).

3. Extend or remove the server from the rack ("Extending the server from the rack" on page 16).

4. Remove the access panel ("Access panel" on page 20).

5. Slide the media latch to release the drives while pushing the CD-ROM drive from the inside of the

chassis slightly out of the bay.

• In tower configurations, use the media latch on the side of the removable media cage.

• In rack configurations, use the media latch on the top of the removable media cage.