Specifications

Removal and replacement procedures 35
6.
Lift the air baffle up and out of the server.
To replace the component, reverse the removal procedure.
Center wall
To remove the component:
1. Power down the server (on page 16).
2. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).
3. Extend or remove the server from the rack ("Extending the server from the rack" on page 16).
4. Remove the access panel ("Access panel" on page 20).
5. Remove all expansion boards ("Expansion board" on page 33).
6. Loosen the four thumbscrews that secure the center wall to the chassis.
7. Lift the wall up enough to reach the fan cable.