Specifications

Removal and replacement procedures 30
4.
Remove the fan.
To replace the component, reverse the removal procedure.
Redundant hot-plug fan cage
For full redundancy, always install all three fans included in the redundant hot-plug fan option kit.
To remove the component:
1. Power down the server (on page 16).
2. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).
3. Extend or remove the server from the rack ("Extending the server from the rack" on page 16).
4. Remove the access panel ("Access panel" on page 20).
5. Remove the fans from the redundant fan cage.
6. Remove the redundant fan cage retaining bracket from the chassis.