Specifications

Removal and replacement procedures 26
10.
Disconnect the power cable from the SCSI hard drive backplane.
11. Remove the four (4) screws that secure the hard drive cage into the chassis.
12. Remove the hard drive cage.
To replace the component, reverse the removal procedure.
CAUTION: When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
Hard drive blank (SAS)
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To remove the component:
1. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).