Specifications

Removal and replacement procedures 24
3.
Remove the power supply.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To replace the component, reverse the removal procedure.
Hard drive blank (SCSI)
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To remove the component:
1. Unlock and open the front bezel ("Front bezel" on page 19) (tower servers only).
2. Remove the blank.
To replace the component, reverse the removal procedure.