Installation guide

Installing Hardware Options 3-47
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
2. Remove the two Torx T-15 screws .
3. Remove the power supply blank .
NOTE: Your ProLiant ML370 Generation 2 server ships with a Torx T-15 tool attached to
the rear panel.
Figure 3-46. Removing a power supply blank
4. Slide the second hot-plug power supply into the bay .
5. Raise the handle and press it against the chassis to lock the power
supply into the bay
.
Figure 3-47. Installing a hot-plug power supply