Installation guide

Installing Hardware Options 3-43
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
6. Reinstall the redundant fan cage retaining bracket .
7. Tighten both thumbscrews to secure the bracket and cage .
Figure 3-41. Installing the redundant fan cage retaining bracket
Installing Hot-Plug Fans
After the redundant fan cage is installed, insert two of the hot-plug fans into
the redundant fan cage and one fan into the redundant slot on the fan cage
along the center wall.
1. Locate the two available slots on the redundant fan cage.
2. Slide one of the hot-plug fans into a fan cage slot and press down until
the fan is seated securely.
NOTE: Any hot-plug fan provided in your option kit can be installed in any of the hot-plug
fan slots. Fans are keyed to fit only one way in the slot.