Installation guide

3-38 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
3. Slide the device part of the way into the bay.
Figure 3-35. Installing a half-height media device
4. Connect the 4-pin power cable to the half-height drive .
5. Connect the 3-device SCSI cable to the half-height drive .
Figure 3-36. Connecting the power and signal cables for a tape drive
IMPORTANT: SCSI connector A on the system board and the external VHDCI SCSI
connector on the rear panel use the same SCSI channel without support for both internal
and external devices at the same time. Disconnect external devices from the external
VHDCI SCSI connector before connecting an internal device to SCSI connector A
(or the reverse).