Installation guide

Installing Hardware Options 3-35
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
2. Use the Torx T-15 tool provided with your server to remove the four
installation screws from the bezel blanks.
Figure 3-30. Removing installation screws from a bezel blank
3. Insert the drive into the bezel blank tray .
4. Insert the four installation screws through the bezel tray cutouts and
attach to the hard drive
. Refer to your option kit documentation for
exact screw hole locations on the hard drive.
Figure 3-31. Securing a non-hot-plug hard drive to the bezel blank tray