Installation guide

Installing Hardware Options 3-31
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
To remove a hard drive blank:
1. Grab the two thumb tabs and squeeze them together to release the
locking mechanism
.
2. Pull the blank out of the drive bay .
3. Store the hard drive blank for reuse at a later time.
Figure 3-27. Removing a hard drive blank
To install a blank, align the blank with the empty bay and push the blank
inward until the locking switch engages.