Installation guide

3-30 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
Before installing or configuring additional hard drives, use the following
figures to identify the SCSI ID for each slot.
Figure 3-25. SCSI hard drive slot locations and IDs (tower server)
Figure 3-26. SCSI hard drive slot locations and IDs (rack server)
Compaq ProLiant ML370 Generation 2 servers ship standard with six hot-plug
hard drive blanks. Before installing a hot-plug SCSI hard drive, you must
remove a blank.
CAUTION: Always populate drive bays with either a hard drive or blank. Proper
airflow can only be maintained when the bays are populated. Operating the
server with unpopulated drive bays can lead to improper cooling and thermal
damage.