Installation guide

Installing Hardware Options 3-25
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
Identifying DIMM Slots
Use the following figure and table to identify DIMM slots on the
ProLiant ML370 Generation 2 server system board. The slots are numbered
sequentially (1 through 6), and the paired banks are identified by the letters A,
B, and C.
Figure 3-23. DIMM slots on the system board
Table 3-10
DIMM Slot Identification
Item Description
DIMM slot 1A (populated)
DIMM slot 2B
DIMM slot 3C
DIMM slot 4A (populated)
DIMM slot 5B
DIMM slot 6C
Standard Memory Configurations
You can expand server memory to 6 GB. In the maximum standard memory
configuration, all six DIMM slots are populated with 1-GB 133-MHz ECC
registered SDRAM DIMMs.