Installation guide

3-22 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
NOTE: The processor and sockets are keyed to fit one way only.
6. Lift the heatsink retaining clip over the rear edge of the socket and hook
underneath the socket tabs.
Figure 3-20. Seating the processor clip on the rear of the socket
7. Clasp the front of the assembly clip over the front edge of the socket .
8. Press the assembly clip down to secure the heatsink and processor
assembly in the socket
.
Figure 3-21. Securing the processor and heatsink assembly on the front of
the socket