Installation guide

Installing Hardware Options 3-19
Compaq Confidential Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
Instructions for installing a Smart Array 5i Controller are located in Chapter 6,
Smart Array 5i Controller. For features and installation guidelines for
Remote Insight Lights-Out Edition (RILOE) expansion boards, see Chapter 7,
Remote Insight Lights-Out Edition Options, and visit the Compaq website:
www.compaq.com/manage/remote-lightsout.html
IMPORTANT: If you are installing options before running the server for the first time,
install the Smart Array 5i Controller before installing other options. See Chapter 6,
Smart Array 5i Controller for instructions on installing the controller.
For additional instructions for installing and configuring hardware options,
refer to the documentation that ships with each option kit.
For information on obtaining hardware options and upgrades for your
ProLiant ML370 Generation 2 server, visit the Compaq website:
www.compaq.com/products/servers/proliantml370/
Processors and PPMs
CAUTION: The processor, heatsink, and retaining clip comprise a single
assembly. Separating the processor from the heatsink causes thermal instability
and damage to the server.
IMPORTANT: If you must replace a failed processor or processors, clear the status log in
RBSU after powering up the server. Refer to your maintenance and service guide for
replacement instructions or contact your Compaq authorized service provider.
Installing a Second Processor with Heatsink
Compaq ProLiant ML370 Generation 2 servers support the installation of a
second Intel Pentium III processor for enhanced availability. Processor option
kits available for your ProLiant ML370 Generation 2 server include an Intel
Pentium III processor with heatsink and a power processor module (PPM).
IMPORTANT: When you install a second processor and PPM, the processor must be the
same type and speed as the primary processor. Install only the PPM provided in the option
kit with your processor.