Installation guide

Installing Hardware Options 3-17
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
2. Loosen the two thumbscrews that secure the bezel to the front of the
rack
.
3. Slide the server out from the rack until the sliding rails lock .
Figure 3-15. Sliding the server out of the rack
4. Press down on the access panel latch to unlock .
5. Continue to hold the latch down while you slide the access panel toward
the rear of the server
.
Figure 3-16. Removing the access panel (rack server)
6. Remove the access panel from the server.