Installation guide

Installing Hardware Options 3-7
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
WARNING: When performing non-hot-plug operations, you must power down
the system. However, it may be possible to leave the server powered up when
performing other operations, such as hot-plug installations or troubleshooting.
Use the procedures in this chapter and in Chapter 2, “Planning the Server
Installation,” to prepare your server for hardware option installations.
Front Panel Components
Use the following figures and tables to locate components on the front panels
of the ProLiant ML370 Generation 2 tower and rack servers.
Tower Server
Figure 3-7. Front panel components of the tower server
Table 3-3
Front Panel Components of the Tower Server
Item Component Item Component
UID switch and LED Power button/LED assembly
Internal system health LED Diskette drive
External system health LED Removable media area
Network LED Hot-plug SCSI hard drive bays
(SCSI IDs 0 through 5)