Installation guide

Installing Hardware Options 3-3
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
Table 3-1
Tower and Rack Chassis Components
continued
Item Description
Diskette drive
Removable media area
Hot-plug SCSI hard drive cage
Unlocking and Opening the Front Bezel
Compaq ProLiant ML370 Generation 2 tower servers have a removable front
bezel. To access the hard drive cage and removable media area, first unlock
and open the bezel door. You must also unlock the bezel before removing the
access panel. During normal operations, the bezel door must remain closed.
Use the key provided with your server to open the bezel lock with a
counterclockwise turn as shown in the following illustration. Refer to your
maintenance and service guide if you need to replace the key or other
hardware components, or refer to server support resources on the Compaq
website:
www.compaq.com/servers/support
Figure 3-2. Unlocking the front bezel