Installation guide

3-2 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
CAUTION: Always ensure that equipment is properly grounded before beginning
any installation procedure. Electrostatic discharge resulting from improper
grounding can damage electronic components. For more information, see
Appendix B, “Electrostatic Discharge.”
Tower and Rack Servers
The primary differences between the ProLiant ML370 Generation 2 tower and
rack servers are the chassis orientations and front bezel configurations. Use the
following figure and table to compare chassis components.
Figure 3-1. Tower and rack chassis components
Table 3-1
Tower and Rack Chassis Components
Item Description
Access panel
Power button/LED assembly
continued