Installation guide

Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: d-ch03 Installing Hardware Options-J.doc Last Saved On: 7/13/01 11:36 AM
Chapter 3
Installing Hardware Options
This chapter provides information and procedures for installing hardware
options in Compaq ProLiant ML370 Generation 2 servers. For complete
instructions, refer to the installation documentation that ships with each option
kit. Refer to the following illustrated guides to install Compaq options:
■ Hardware installation and configuration poster that ships with your
server
■ Labels attached to the inside of the server access panel
To streamline the installation process, read the installation instructions for all
of your hardware options and identify similar steps before installing each
component.
After you install hardware options, proceed with the server installation
procedures in Chapter 4, “Installing the Rack Server,” or Chapter 5, “Installing
the Tower Server.”
For additional information about installation or troubleshooting procedures,
contact your Compaq authorized reseller.
WARNING: To reduce the risk of personal injury or damage to the equipment:
■ Heed all warnings and cautions throughout the installation instructions.
■ Allow internal system components to cool before touching any surfaces.
■ Ensure that the power to the server is turned off and that the AC power
cord is disconnected before removing the access panel.