Installation guide

Planning the Server Installation 2-9
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: c-ch02 Planning the Server Installation-J.doc Last Saved On: 7/12/01 1:25 PM
CAUTION: Protect the server from power fluctuations and temporary
interruptions with a regulating UPS device. This device protects the hardware
from damage caused by power surges and voltage spikes and keeps the system
in operation during a power failure.
CAUTION: Do not operate the server for long periods without the access panel.
Operating the server without the access panel results in improper airflow and
improper cooling that can lead to thermal damage.
Rack Server Shipping Contents
Unpack the server box and locate the materials and documentation necessary
for installing your server. All of the rack-mounting hardware necessary for
installing the ProLiant ML370 Generation 2 rack server into a Compaq rack is
included with your server.
The contents of the rack server box provided with your server include the
following:
■ Compaq ProLiant ML370 Generation 2 server
■ Power cord
■ Hardware documentation, reference information, and software products
■ Rack-mounting hardware
NOTE: A Torx T-15 tool is provided with your server and is located on the rear panel.