Installation guide

Index 19
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked
By Devin
Part Number: 203510-001 File Name: x-index-J.doc Last Saved On: 7/12/01 11:41 AM
standard ECC memory
default setting 9-8
enabling 9-8
startup and shutdown sequence
playback 7-5
startup problem diagnosis D-12
static electricity B-1
static-dissipating work mat B-2
static-sensitive devices B-1
storage
internal 1-7
storage media 1-6
storage menu usage 9-4
straps
heel B-2
toe B-2
wrist B-2
strips, power 2-5
Survey Utility 9-18
switches
front and rear unit
identification E-9
locating 3-11
non-maskable interrupt
(NMI) E-17
Power On/Standby 3-14
system board E-15
system maintenance
(SW1) E-16
symbols in text xii
symbols on equipment xii
system board
battery replacement G-1
LEDs E-11
safety B-1
when to replace D-11
system board components
DIMM slots 3-12
diskette drive connector 3-12
fan cable connector 3-12
fan connectors 3-11
IDE connector 3-12
locating 3-11
NMI switch 3-11
PCI expansion slots 3-11
PCI Hot Plug backplane
connector 3-11
power supply connector 3-12
power supply signal
header 3-12
PPM slots 3-12
processor sockets 3-12
Remote Management
connectors 3-12
SCSI connectors 3-12
Smart Array 5i Controller
connector A 3-11
Smart Array 5i Controller
connector B 3-11
Smart Array 5i slots 3-11
system battery connector 3-11
system identification switch
(SW2) 3-11
system maintenance switch
(SW1) 3-12
system board LEDs
DIMM slots E-11
locating E-12
PPM E-11
processors E-11
system overtemperature E-11
system board switches E-15
locating E-15
NMI E-15
system identification E-15
system maintenance E-15
system configuration, ROM-Based
Setup Utility 9-2
System Erase Utility
caution D-12
uses D-12
system fans 1-9
system health LEDs
features 1-9
system identification switch
locating 3-11
system LEDs E-1
external E-1
fans E-1
front panel E-1
hard drive E-1