Installation guide

14 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked
By Devin
Part Number: 203510-001 File Name: x-index-J.doc Last Saved On: 7/12/01 11:41 AM
power cord A-8
connecting 4-13, 5-3
current rating A-8
placement A-8
safe use 2-8, 3-6
securing 4-16, 5-5
set A-8
voltage rating A-8
power cord retaining clip 4-16
power distribution unit See PDU
Power On/Standby button 3-14
rack models 4-17
tower models 5-6
power strips
grounding requirements 2-5
load restriction 2-5
power supplies
LEDs
hot-plug E-10
locating 3-9, 3-10
security lock 1-14
power supply connector 3-12
power supply security lock 1-14
power supply signal header 3-12
powering down the server 3-12,
4-17, 5-5
power-on password 1-14
disabling 9-7
setting 9-4
Power-On Self-Test (POST) 1-15
PPM
installing 3-23
locating slots 3-20
PPM slots
locating 3-12
Preboot Execution
Environment See PXE
technology
Pre-Failure Warranty 1-10
Smart Array 5i Controller 6-1
primary operating system 9-3
printing the event list 9-17
processor sockets
locating 3-12
processors 1-1
features 1-4
future technologies 1-5
hot-spare boot 1-5
installing 3-19
locating sockets 3-20
offline spare 1-5
redundant boot capability 1-5
Remote Insight board 7-2
product safety A-4
PXE support
disabling 9-7
embedded NIC settings in
RBSU 9-4
PXE technology 1-2, 1-6
Q
QuickLock 1-14
disabling 9-7
setting 9-5
R
rack
airflow requirements 2-2
aligning server 4-10
blanking panels 2-2
cage nuts placement 4-5
CDs 2-6. See also CDs
Rack Builder Configuration 2-6
Rack Information Library 2-6
Rack Optimization 2-6
Rack Products
Documentation 2-6
Rack Resource CD Kit 2-6
clearances 2-2
cooling requirements 2-6
grounding requirements 2-5
hardware, rack-mounting 2-10
installation overview 4-1
ordering requirements 2-6
physical specifications 2-6
power requirements 2-4, 2-6
resources 2-6
screw retaining plate 4-13