Installation guide

System Battery G-3
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203510-001 File Name: r-appg System Battery-J.doc Last Saved On: 7/12/01 11:35 AM
5. Insert the new battery.
Figure G-3. Installing the battery
6. Install the access panel as directed in Chapter 3, “Installing Hardware
Options.”
7. Reconnect the power cord and peripheral devices. See “Connecting the
Power Cord and Peripheral Devices” in Chapter 4, “Installing the Rack
Server,” or in Chapter 5, “Installing the Tower Server.”
8. Power up the server. See “Powering Up the Server” in Chapter 4,
“Installing the Rack Server,” or in Chapter 5, “Installing the Tower
Server.”
9. Run the System Configuration Utility to reconfigure the system with the
new battery. See Chapter 9, “Server Configuration and Utilities.”