Installation guide

G-2 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203510-001 File Name: r-appg System Battery-J.doc Last Saved On: 7/12/01 11:35 AM
To install a new battery:
1. If the server is on, remove power from the system. For detailed
instructions, see “Preparing the Server” in Chapter 3, “Installing
Hardware Options.”
2. Remove the access panel. See “Removing the Access Panel” in
Chapter 3, “Installing Hardware Options.”
3. Locate the battery connector on the system board.
Figure G-1. System battery
4. Remove the existing battery.
Figure G-2. Removing the battery