Installation guide

E-16 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: p-appe LED Indicators and Switches-J.doc Last Saved On: 7/12/01 11:30 AM
System Maintenance Switch
The system maintenance switch (SW1) is a six-position switch that is used for
system configuration. The default setting for all six positions is off. For the
proper system maintenance switch settings, refer to the labels attached to the
inside of the server access panel or see the following table.
Table E-10
System Maintenance Switch (SW1)
Position Description On/Off Function
1 RESERVED —
2 Configuration lock Off = System configuration can be changed.
On = System configuration is locked and cannot
be modified.
3 Rack mount indicator Off = System is in a tower configuration.
On = System is in a rack-mounted configuration.
4 Enable diskette boot Off = Booting from diskette is controlled by
RBSU.
On = Booting from diskette is enabled and RBSU
setting is overridden.
5 Password disable Off = Power-on password works normally.
On = Power-on password is disabled.
6 Invalidate configuration Off = No function is available.
On = ROM treats system configuration as invalid.