Installation guide

LED Indicators and Switches E-15
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: p-appe LED Indicators and Switches-J.doc Last Saved On: 7/12/01 11:30 AM
System Board Switches
Some server operations, including adding or removing a component, changing
a security feature, or reconfiguring the server from tower to rack, require that
you reconfigure a system switch. If the system configuration is incorrect, your
server may not work properly and you may receive error messages on the
screen.
This section discusses the following system board switches:
■ System maintenance
■ System identification
■ Non-maskable interrupt
Figure E-9. System board switches
Table E-9
System Board Switches
Item Switch Type
Non-maskable interrupt switch (SW4)
System identification switch (SW2)
System maintenance switch (SW1)