Installation guide

LED Indicators and Switches E-13
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: p-appe LED Indicators and Switches-J.doc Last Saved On: 7/12/01 11:30 AM
System LEDs and Internal Health LED Status
Combinations
When the internal health LED on the front panel illuminates either amber or
red, the server is experiencing a health event. The combinations of illuminated
system LEDs and the internal health LED in the following table indicate
system status.
NOTE: The system management driver must be installed in order for the internal health
LED to provide pre-failure and system conditions.
The internal health LEDs on the front panel indicate the current hardware
status and are used to assist in initial troubleshooting. Note that in some
situations, Compaq Insight Manager XE reports server status differently than
the health LEDs because it tracks more system attributes.
Table E-8
System LEDs and Internal Health LED Status Combinations
System LED and Color Internal Health
LED Color
Status
Red
■ Processor in socket X has failed.
■ Processor has failed over to offline spare.
■ Processor is not installed in socket X.
■ ROM detects a failed processor during POST.
Processor failure, socket X
(amber)
Amber Processor in socket X is in pre-failure condition.
Processor failure, both
sockets (amber)
Red Processor types do not match.
PPM failure, slot X (amber) Red
■ PPM in slot X has failed.
■ PPM X is not installed.
■ PPM is not installed, but the corresponding
processor is installed.
continued