Installation guide

E-10 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: p-appe LED Indicators and Switches-J.doc Last Saved On: 7/12/01 11:30 AM
Hot-Plug Power Supply LEDs
Determine the hot-plug power supply status by noting the color of the power
supply LED located adjacent to the AC inlet.
Figure E-6. Hot-plug power supply LEDs
Table E-6
Hot-Plug Power Supply LEDs
Item Description
Secondary (redundant) power supply
Primary power supply
When the power supply LED is off, the following conditions may exist:
No AC power is available.
The power supply has failed.
The power supply is in standby mode.
The power supply has exceeded current limit.
When the power supply LED is green, the power is turned on and the power
supply is functioning properly.