Installation guide

LED Indicators and Switches E-9
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: p-appe LED Indicators and Switches-J.doc Last Saved On: 7/12/01 11:30 AM
Rear Unit Identification LED Switch
Compaq ProLiant ML370 Generation 2 servers include unit identification
LEDs with switches on both the front and rear panels. The UIDs indicates
activity status and can be toggled on and off by the hardware push button or
Compaq Insight Manager XE.
The rear UID provides a visual reference for locating an individual server in a
rack of servers. The rear UID contains an integrated button to activate or
deactivate the LED.
Figure E-5. Rear UID and switch (rack model)
The rear UID indicates the following states:
■ Blue = The switch is activated.
■ Blue flashing = The system is being monitored remotely.
■ Off = The switch is deactivated.
NOTE: You can activate and deactivate the UID from either the front or rear UID switch.