Installation guide

10-14 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-01 File Name: k-ch10 PCI Hot Plug Technology-J.doc Last Saved On: 7/13/01 11:47 AM
3. Press the slot release lever down to release .
4. Flip the lever up to open the slot .
5. Hold down the PCI Hot Plug slot ejector down while you pull upward
on the handle to eject the expansion board from the slot .
IMPORTANT: Hold the PCI Hot Plug divider down and securely in place while using the
ejector handle to avoid jarring the assembly or expansion boards.
Figure 10-10. Using the PCI Hot Plug slot ejector to release the expansion
board
6. Lift the expansion board out of the server.
Figure 10-11. Removing a PCI Hot Plug expansion board from the server