Installation guide

PCI Hot Plug Technology 10-13
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-01 File Name: k-ch10 PCI Hot Plug Technology-J.doc Last Saved On: 7/13/01 11:47 AM
Removing a PCI Hot Plug Expansion Board
Your Compaq ProLiant ML370 Generation 2 server includes a PCI slot
divider and ejector to ensure slot safety and to facilitate expansion board
removal. Use the following procedure to remove an expansion board from a
PCI Hot Plug slot:
1. Power down the PCI Hot Plug slot. See “Installing PCI Hot Plug
Expansion Boards” in this chapter.
IMPORTANT: Ensure that the slot LED is off before removing the expansion board.
2. Release the PCI guide clip.
Figure 10-9. Releasing the PCI guide clip