Installation guide

10-8 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-01 File Name: k-ch10 PCI Hot Plug Technology-J.doc Last Saved On: 7/13/01 11:47 AM
PCI Hot Plug Expansion Slots
Compaq ProLiant ML370 Generation 2 servers support two PCI Hot Plug slots
and four non-hot-plug PCI slots. While all six slots can be used to install PCI
non-hot-plug expansion boards, only slots 1 and 2 can be used for
PCI Hot Plug operations. Use the following illustration and table to identify
the location of each slot.
Figure 10-3. PCI expansion slots
Table 10-4
PCI Expansion Slots
Item Description
PCI Hot Plug slot 1 (64-bit/66-MHz)
PCI Hot Plug slot 2 (64-bit/66-MHz)
PCI slot 3 (64-bit/33-MHz)
PCI slot 4 (64-bit/33-MHz)
PCI slot 5 (64-bit/33-MHz)
PCI slot 6 (64-bit/33-MHz)
For instructions on installing an expansion board into a non-hot-plug PCI
expansion slot, see “Installing a Non-Hot-Plug Expansion Board” in
Chapter 3, “Installing Hardware Options.”