Installation guide

PCI Hot Plug Technology 10-7
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-01 File Name: k-ch10 PCI Hot Plug Technology-J.doc Last Saved On: 7/13/01 11:47 AM
Table 10-3
PCI Expansion Slot LEDs
continued
Item Description OK to Open Slot Status
Power
Fault
Green = Off
Amber = On
Yes Power to this slot is turned off, but this slot
needs ATTENTION. There may be a problem
with the slot, board, or driver. Follow these
steps:
1. Open the slot release lever. The amber
LED turns off.
2. Remove or insert the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Use the PCI Hot Plug button or PCI utility
to return power to the slot. The green
LED turns on.
Power
Fault
Green = Off
Amber = Off
Yes The power to the slot is off. To add a board in
this slot, follow these steps:
1. Open the slot release lever.
2. Insert the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Use the PCI Hot Plug button or PCI utility
to return power to the slot. The green
LED turns on.