Installation guide

9-16 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: j-ch09 Server Configuration and Utilities-J.doc Last Saved On: 7/12/01 1:54 PM
■
Caution—indicates a non-fatal error condition occurred
■ Critical—indicates a component failure has occurred
IML requires Compaq operating system-dependent drivers. Refer to the
Compaq SmartStart CD for instructions on installing the appropriate drivers.
Viewing the Log
You can view recorded events in the IML in several ways, including the
following:
■ From within the Compaq Insight Manager XE
■ From within the Compaq Survey Utility
■ From within operating system specific IML viewers
G For a Windows NT operating system, Event Viewer or Compaq IML
Viewer
G For a NetWare operating system, Compaq IML Viewer
G For a Linux operating system, Compaq IML Viewer Application
Compaq Insight Manager XE
Compaq Insight Manager XE is a server management tool that provides
in-depth fault, configuration, and performance monitoring of hundreds of
Compaq servers from a single management console. The system parameters
that are monitored describe the status of all key server components. By being
able to view the events that may occur to these components, you can take
immediate action.
Use the instructions in the following section to view and print the event list
from within Compaq Insight Manager XE. You can also mark a critical or
caution event as repaired after the affected component has been replaced. For
example, when a failed fan is replaced, you can mark the event as repaired,
which lowers the severity of the event.
NOTE: You can only view the list from the Recovery/Integrated Management Log screen.