Installation guide

Server Configuration and Utilities 9-13
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: j-ch09 Server Configuration and Utilities-J.doc Last Saved On: 7/12/01 1:54 PM
To run the Diskette Builder, you need the following:
■ A PC with one of the following operating systems:
G Microsoft Windows 95
G Microsoft Windows 98
G Microsoft Windows NT
G Microsoft Windows 2000
■ Several 1.44-MB diskettes
All existing data on the diskettes is overwritten. Insert the SmartStart CD in
the workstation drive. The CD automatically runs the Diskette Builder utility.
However, if the PC does not support the auto-run feature, use
Windows Explorer and enter the following command line:
[CD-ROM DRIVE]:\DSKBLDR\DSKBLDR.EXE
SmartStart Scripting Toolkit
The SmartStart Scripting Toolkit is a set of DOS-based utilities that enable
you to configure and deploy servers in a customized, predictable, and
unattended manner. These utilities provide scripted server and array
replication for mass server deployment and duplicate the configuration of a
configured source server onto target systems with minimum user interaction.
The Configuration Replication Utility is a stand-alone DOS utility that
duplicates the settings of an operating RBSU-configured server by saving the
server configuration to a scripted file. You can edit and modify settings in the
scripted file at the subset level. For example, you can change ASR-2 settings
without having to change settings for boot controller order.
For more information, refer to the Compaq SmartStart Scripting Toolkit User
Guide.