Installation guide

Server Features 1-5
Compaq Confidential Need to Know Required
Writer: CDresden Project: Proliant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: b-ch01 Server Features-J.doc Last Saved On: 7/12/01 9:40 AM
Offline spare processor support with a second processor installed
Support for future Intel processor technologies
Memory
Compaq ProLiant ML370 Generation 2 servers support Compaq Advanced
Memory Protection features including:
2 × 1 interleaving memory configuration
133-MHz registered SDRAM Dual Inline Memory Modules (DIMMs)
ECC memory for single-bit memory error correction and multi-bit
memory error detection
System memory expandable to 6 GB
Support for online spare memory
Expansion Slots
Compaq ProLiant ML370 Generation 2 servers provide support for installing
or connecting peripheral components through six expansion slots. The
expansion slots on the system board are configured as follows:
Six expansion slots
G Two 64-bit/66-MHz full-length PCI Hot Plug slots with peak
transfer rates of 533 MB/s
G Four 64-bit/33-MHz full-length PCI expansion slots with peak
transfer rates of 266 MB/s
Support for peripheral transactions at a clock speed of up to 66 MHz
Integrated SCSI Controller
Compaq ProLiant ML370 Generation 2 servers include a standard Integrated
Dual Channel Ultra3 SCSI Controller with:
64-bit PCI bus master interface
Ultra3 SCSI bus transfer rate with peak transfer rate of 160 MB/s per
channel
Two SCSI ports supporting up to six internal hot-plug Wide Ultra2 or
Ultra3 SCSI hard drives