Installation guide

Server Configuration and Utilities 9-9
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: j-ch09 Server Configuration and Utilities-J.doc Last Saved On: 7/12/01 1:54 PM
Saving RBSU Configuration Settings
To save RBSU configuration settings, use the Configuration Replication
Utility from the SmartStart Scripting Toolkit. Saving the configuration enables
you to restore settings at a later date. Use the Configuration Replication Utility
from the SmartStart CD or download the Scripting Toolkit from the Compaq
website:
www.compaq.com/support/files/server
Redundant ROM Support
Compaq ProLiant ML370 Generation 2 servers enable you to upgrade or
configure your ROM safely with redundant ROM support. The server has a
2-MB ROM that acts as two, separate 1-MB ROMs. In the standard
implementation, one side of the ROM contains the current ROM program
version, while the other side of the ROM contains the backup version.
Safety and Security Benefits
When you flash the system ROM, ROMPaq writes over the backup ROM and
saves the current ROM as a backup, enabling you to switch easily to the
existing ROM version if the new ROM becomes corrupted for any reason.
This feature protects your previous ROM version, even if you experience a
power failure while flashing the ROM.
Access to Redundant ROM Settings
Use ROMPaq utilities to create a backup ROM image before upgrading the
configuration or to restore saved ROM data.
1. Access RBSU by pressing the F9 key during power up when the prompt
displays in the lower right corner of the screen.
2. Select Advanced Options.
3. Select Redundant ROM.
4. Select one of the ROM banks as the system ROM.
5. Press the Enter key.
6. Press the Esc key to exit the current menu or press the F10 key to exit
RBSU.
7. Restart the server.