Installation guide

9-8 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: j-ch09 Server Configuration and Utilities-J.doc Last Saved On: 7/12/01 1:54 PM
Table 9-1
RBSU Default Settings
continued
Menu/Option Default Setting
Advanced Options
MPS Table Mode
Enabled
POST Speed Up
Enabled
Wake on LAN
Disabled
Erase Non-volatile Memory
Enabled
Advanced Memory Protection
Standard ECC Support
Enabled
Online Spare Memory Support
Disabled
Fan Speed
Normal
Enabled
Low
Disabled
Configuring Online Spare Memory
To configure online spare memory support:
1. Install the required DIMMs. See “Memory” in Chapter 3, “Installing
Hardware Options.”
IMPORTANT: If your DIMM configuration does not meet the criteria for online spare
memory support, the system does not allow you to configure this feature.
2. Access RBSU by pressing the F9 key during power up when the prompt
displays in the lower right corner of the screen.
3. Select Advanced Options.
4. Select Advanced Memory Protection.
5. Select Online Spare Memory Support.
6. Press the Enter key.
7. Press the Esc key to exit the current menu or press the F10 key to exit
RBSU.