Installation guide

9-2 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: j-ch09 Server Configuration and Utilities-J.doc Last Saved On: 7/12/01 1:54 PM
ROM-Based Setup Utility
RBSU replaces the System Configuration Utility used in previous systems.
RBSU performs a wide range of configuration activities including the
following:
■ Configuring system devices and installed options
■ Viewing system information
■ Selecting the operating system
■ Selecting the primary boot controller
■ Managing storage options
■ Configuring online spare memory
In addition, RBSU includes other features, which are outlined in “Using
RBSU” in this chapter.
Navigating RBSU
To navigate RBSU, use the following keys:
■ To access RBSU, press the F9 key during power up.
■ To navigate the menu system, use the arrow keys.
■ To make selections, press the Enter key.
RBSU automatically saves settings when you press the Enter key. The utility
does not prompt you for confirmation of settings before you exit the utility. To
change a selected setting, you must select a different setting and press the
Enter key.
Using RBSU
The first time you power up the server, the system prompts you to enter
RBSU, select an operating system, and select a language. Default
configuration settings are made at this time and can be changed later.
NOTE: Most of the features in RBSU are not required in the setup of your server. The
options in this utility are designed to assist with specific server configuration issues.